Cart
Items
No products found...
Fittings
Elkhart Supplies
Flex Tube Nut/Insert
In stock
Article code 33759
This fitting allows you to connect a Flair-It male pipe thread fitting to a flexible 1/2" water line. The fitting inserts into inside of the tubing as well as a nut that is on the outside of the tubing, tightening creates a durable bond.
Camco
Faucet adapter
In stock
Article code 36056
Faucet Hose Adapter; Used To Connect Garden Hose To Faucet; Fits Both Male and Female Faucet Threads; Brass.
Elkhart Supplies
1/2" Pex x 1/2" Swivel 90 degree
In stock
Article code 33452
Fresh Water Fitting; BestPEX; Adapter; 1/2 Inch PEX x 1/2 Inch Female Pipe Thread Plastic Swivel End Nut; 90 Degree Elbow; Brass;
Flair it
1/2"P X 1/2"SFPT Straight
In stock
Article code 33451
Fresh Water Fitting; BestPEX; Adapter; 1/2 Inch PEX x 1/2 Inch Female Pipe Thread Plastic Swivel End Nut; Straight; Brass
Flair it
1/2p x 1/2fpt swivel elbow
In stock
Article code 33710
Faucet connection to Flair-it™ connection. Priced each. *For use with PEX only. Elbow with female pipe thread.
Flair it
1/2"p x 1/2"p coupling
In stock
Article code 33714
This Flair-It 1/2" Flare x 1/2" Flare Coupling will work on PEX and Polybutylene Pipe.
Flair it
1/2 x 1/2 Elbow
In stock
Article code 33706
Used between two pieces of tubing to introduce a 90-degree turn
Works with both PEX tubing and Gray tubing
Requires no tools or additional hardware to install
Works with both PEX tubing and Gray tubing
Requires no tools or additional hardware to install
Shurflo
1/2" FPT X 1/2" Barb Elbow Swivel
In stock
Article code 36990
Wingnut Swivel, Nylon: Pump head fittings included with each pump
1/2 inch x 14 Male Pipe Thread (F) x 1/2 inch Barb, Elbow Fitting
1/2 inch x 14 Male Pipe Thread (F) x 1/2 inch Barb, Elbow Fitting
Flair it
1/2x1/2x1/2 3 way valve
In stock
Article code 33731
FITTINGS - For hot and cold potable water fittings (150 degrees at 100 psi)
Squarely cut end of tubing, slide nut over tubing
Firmly press tubing onto the flare of the fitting
Slide the nut to the threads and hand tighten securely onto the fitting
Squarely cut end of tubing, slide nut over tubing
Firmly press tubing onto the flare of the fitting
Slide the nut to the threads and hand tighten securely onto the fitting

C$26.99
1/2x1/2x1/2 3 way valve
FITTINGS - For hot and cold potable water fittings (150 degrees at 100 psi)
Squarely cut end of tubing, slide nut over tubing
Firmly press tubing onto the flare of the fitting
Slide the nut to the threads and hand tighten securely onto the fitting
Squarely cut end of tubing, slide nut over tubing
Firmly press tubing onto the flare of the fitting
Slide the nut to the threads and hand tighten securely onto the fitting
In stock, ready to ship.
Lasalle Bristol
1/2" MPT Qest test plug
In stock
Article code 32981
Fitting Plug/ Fitting Cap; QEST; 1/2 Inch Female Pipe Thread Test Plug
Lasalle Bristol
1/2 Cap
In stock
Article code 32830
Fitting Plug/ Fitting Cap; 1-1/2 Inch Female Pipe Thread; White; With Nose Cone Gasket; Single
Valterra
1/2x1/2 male coupling
In stock
Article code 32740
Fresh Water Hose Connector; Converts Female NPT to Male NPT; 1/2 Inch Male To Male; Plastic;
Camco
1/2" water heater drain valve
In stock
Article code 93230
Replace faulty RV water heater valve
Easy installation
1/2-Inch NPT male threads
Durable brass construction
Easy installation
1/2-Inch NPT male threads
Durable brass construction
Thetford
3" Adapter Waste Tank
In stock
Article code 31230
Waste Holding Tank Flange; For Icon Direct Holding Tank; 3 Inch Diameter; Black; ABS Plastic; Single
Fairview Fittings
Pex clamp 1/2''
In stock
Article code RTFFHCPEX-10-100
For 1/2" Pipe
Need Special plyers to crimp
Need Special plyers to crimp