Fittings
Elkhart Supplies
Flex Tube Nut/InsertThis fitting allows you to connect a Flair-It male pipe thread fitting to a flexible 1/2" water line. The fitting inserts into inside of the tubing as well as a nut that is on the outside of the tubing, tightening creates a durable bond.
Camco
Faucet adapterFaucet Hose Adapter; Used To Connect Garden Hose To Faucet; Fits Both Male and Female Faucet Threads; Brass.
Flair it
1/2"P X 1/2"SFPT StraightFresh Water Fitting; BestPEX; Adapter; 1/2 Inch PEX x 1/2 Inch Female Pipe Thread Plastic Swivel End Nut; Straight; Brass
Valterra
1/2x1/2 male couplingFresh Water Hose Connector; Converts Female NPT to Male NPT; 1/2 Inch Male To Male; Plastic;
Flair it
1/2p x 1/2fpt swivel elbowFaucet connection to Flair-it™ connection. Priced each. *For use with PEX only. Elbow with female pipe thread.
Flair it
1/2"p x 1/2"p couplingThis Flair-It 1/2" Flare x 1/2" Flare Coupling will work on PEX and Polybutylene Pipe.
Flair it
1/2 x 1/2 ElbowUsed between two pieces of tubing to introduce a 90-degree turn
Works with both PEX tubing and Gray tubing
Requires no tools or additional hardware to install
Shurflo
1/2" FPT X 1/2" Barb Elbow SwivelWingnut Swivel, Nylon: Pump head fittings included with each pump
1/2 inch x 14 Male Pipe Thread (F) x 1/2 inch Barb, Elbow Fitting
Flair it
1/2x1/2x1/2 3 way valveFITTINGS - For hot and cold potable water fittings (150 degrees at 100 psi)
Squarely cut end of tubing, slide nut over tubing
Firmly press tubing onto the flare of the fitting
Slide the nut to the threads and hand tighten securely onto the fitting
Elkhart Supplies
1/2" Pex x 1/2" Swivel 90 degreeFresh Water Fitting; BestPEX; Adapter; 1/2 Inch PEX x 1/2 Inch Female Pipe Thread Plastic Swivel End Nut; 90 Degree Elbow; Brass;
Lasalle Bristol
1/2" MPT Qest test plugFitting Plug/ Fitting Cap; QEST; 1/2 Inch Female Pipe Thread Test Plug
Camco
1/2" water heater drain valveReplace faulty RV water heater valve
Easy installation
1/2-Inch NPT male threads
Durable brass construction
Thetford
3" Adapter Waste TankWaste Holding Tank Flange; For Icon Direct Holding Tank; 3 Inch Diameter; Black; ABS Plastic; Single
